Network Router User Manual

2
Performance and Functional Highlights
VNA Master
Broadband coverage of 5 kHz to 6/20 GHz
True 2-port Vector Network Analyzer (VNA)
Ultimate accuracy with 12-term error correction
User-defined quad display for viewing all 4 S-Parameters
Arbitrary data points up to 4001
IF Bandwidth selections of 10 Hz to 100 kHz
85 dB dynamic range to 20 GHz
Supports waveguide measurements
350 µs/data point sweep speed
USB/Ethernet for PC data transfer and control
Automate repetitive tasks via Ethernet & USB
Field upgradable firmware
Store more than 4000 traces and setups in memory
Portable: 10.5 lbs (4.8 kg)
Full Speed USB Memory support
High resolution daylight viewable TFT color display
Time Domain option for Distance-to-Fault diagnostics
Internal Bias Tee option
Vector Voltmeter option
High Accuracy Power Meter option
Differential option (S
d
1
d
1
, S
c
1
c
1
, S
d
1
c
1
, and S
c
1
d
1
)
Secure Data Operation option
GPS Receiver option
Power Monitor option
Polar Format Impedance Display
4, 6, 8, 18, 26 GHz USB Power Sensors
8.4 in. Display
VNA Master + Spectrum Analyzer
All of the above VNA features PLUS:
Measure: Occupied Bandwidth, Channel Power, ACPR, C/I
Dynamic Range: > 104 dB in 1 Hz RBW
DANL: –160 dBm in 1 Hz RBW
Phase Noise: –100 dBc/Hz @ 10 kHz offset at 1 GHz
Frequency Accuracy: < ± 25 ppb with GPS On
1 Hz to 10 MHz Resolution Bandwidth (RBW)
Traces: Normal, Max Hold, Min Hold, Average,
# of Averages
Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
Markers: 6, each with a Delta Marker, or 1 Reference with
6 Deltas
Limit Lines: up to 40 segments with one-button envelope
creation
Trace Save-on-Event: crossing limit line or sweep complete
Option to automatically optimize sweep-RBW-VBW tradeoff
for best possible display
Interference Analyzer Option: Spectrogram,
Signal Strength, RSSI
Channel Scanner Option
Zero-span IF Output
Gated Sweep
GPS tagging of stored traces
Internal Preamplifier standard
High Accuracy Power Meter Option
AM/FM/SSB Demodulation (audio only)