Instructions

Italiano | Nederlands | Dansk | Suomi | Norsk

For round cells:

Intelligent "PERFECT 7 CHARGING" function (SEE PAGE 2):

1. Capacity quick test: Residual capacity is determined

before charging begins and displayed for 5 seconds

2. Gentle pre-charging: Weak or deeply discharged battery is

pre-charged with lower current if necessary

3. Battery analysis: Battery behavior is analyzed and

evaluated to determine whether it is still reliably usable or

defective

4. Quick charge: Battery is charged at maximum current

5. IQ switch-off: Intelligent monitoring of the battery for

reliable charging and multiple protection against

overcharging

6. Top-off charge: Ensures that the battery is gently charged

to 100% capacity

7. Trickle charge: Battery is kept in a fully charged state by

means of charging pulses

For 9V E-Block:

Capacity quick test, defective battery detection, Time-controlled

charging

OPERATION

§ Connect the charger with the included USB cable.

§ Connect the USB cable to any suitable USB port (e.g. power

supply, PC, Power bank…).

§ Insert the battery into the charging slot with the correct polarity

(see engraving in the charging slot).

§ The product displays the charge status of the battery for 5 seconds

and then automatically starts the charging process.

§ As soon as a battery is fully charged, the charger switch to trickle

charge.

§ You can now remove the fully charged battery.

§ After all batteries have been removed, disconnect the product from

the power supply

Italiano | Nederlands | Dansk | Suomi | Norsk