Instructions

ManualsBrandsAnsmann ManualsBattery ChargersAnsmann Comfort Multi NiMH AAA , AA , C, D, 9V PP3 Charger for cylindrical cells

Italiano | Nederlands | Dansk | Suomi | Norsk

Italiano | Nederlands | Dansk | Suomi | Norsk

LED INDICATION

Red Orange Green

Capacity indication (for the first 5s

after insertion)

<25% 25-75% >75%

Charging On

Error Flashing

Full / trickle charge On

Pause (*1) Flashing

(*1) If the connected USB device does not supply enough current (re-

commended min. 2.1A), the device will pause a charging slot. You can

still charge your batteries without any problems, but the charging

process takes longer due to this pause.

TROUBLESHOOTING

Problem Possible cause Resolution

No LED indication - No connection to

USB power source

- USB power supply

defective

- Check the con-

nection

- Use a different

USB power supply

Battery is not recog-

nized

- Battery inserted

with reverse

polarity

- Insert the battery

with the correct

polarity

LED is flashing orange - Battery slot pau-

ses, as the current

of the USB power

source is too low to

charge all batteries

at the same time

- Use USB power

source with a mini-

mum of 2.1A output

current

- Or accept the lon-

ger charging time

CARE AND MAINTENANCE

Cleaning

Disconnect the power supply to the product and remove all batteries

before cleaning.

Only use a soft, dry or slightly damp cloth for cleaning (if necessary, add a

little mild washing-up liquid). Never use abrasives or solvents for cleaning.