Instructions

HOW TO USE

> Capacity indication

Please press the power button to check the remaining power.

 4 LEDs light up: 75%-100%

 3 LEDs light up: 50%-75%

 2 LEDs light up: 25%-50%

 1 LED light up: 1%-25%

NO LIGHT ON:

The POWERBANK is completely discharged. Please recharge the POW-

ERBANK immediately. If the POWERBANK is not in use for a longer time,

it is necessary to charge up the POWERBANK before storage to avoid

any damage of the internal battery.

> HOW TO CHARGE THE POWERBANK:

Connect the supplied Micro-USB plug of the USB cable to the POWER-

BANK and the USB plug to the USB socket of a computer or a suitable

USB charger. The charging process starts automatically. During the

charging process up to 4 flashing LEDs indicate the current charge

level of the POWERBANK. When the POWERBANK is fully charged, all 4

LEDs light up constantly.

> HOW TO CHARGE OTHER DEVICES:

To charge a device, e.g. a smartphone or a tablet, please use the

supplied USB cable (if the Micro-USB plug fits in your mobile device)

or the original charging cable for your device. Connect the USB plug

of the cable to the ANSMANN POWERBANK and the other end to your

device. The charging process starts automatically. While charging

your device, the battery status of the POWERBANK’s internal battery is

indicated by the LEDs.

Please disconnect your device from the POWERBANK when it is fully

charged. The POWERBANK will turn off automatically.

Depending on the charge / discharge current, the POWERBANK can

heat up slightly.

Svenska | Italiano | Nederlands | Dansk