User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 10
SETTING UP
After online activation is complete, please update the Zen Go Synergy Core to the latest
software and firmware versions available. To do this, simply open Antelope Launcher and click
the 'Update' button below the 'Bundle Version' drop-down menu.
After the update is complete, you can proceed with the instructions for your operating
system.
Configuring for Windows 10
W
indows 10 needs a few tweaks to get the Zen Go Synergy Core up and running:
1. Ri
ght-click the speaker icon in the system tray and choose ‘Open Sound settings’.
2.
Ma
ke sure the Zen Go Synergy Core is chosen under 'Output' and 'Input':
• Under 'Output', the device should be listed as 'ZenGo SC USB Audio Driver
Playback'. Note that this choice means you will only hear computer audio from the
microphone's headphone output. If you use another audio device for listening,
choose that one instead.
• Under 'Input', the device should be listed as ‘ZenGo SC USB Audio Driver
Recording 1/2'.
3. Click 'Device Properties' under 'Output'. Then, click 'Additional Device Properties'.
4. Enter the ‘Supported Formats’ tab and place checkmarks next to all the available sample
rates.