User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 15
USB bus power. The interface needs to be powered from an external USB power source, such
as adapter, power bank, or powered USB hub. Here's how to do this:
1. Connect the Zen Go Synergy Core to your mobile device using the USB-C port marked
'AUSB' .
2. Connect the USB power source to the Power USB-C port on the interface.
3. Press and hold the 'HP/MON' button on the interface's top panel to enter the System Menu.
4. Turn the rotary control to select the 'Power Source' menu entry. Press the rotary control to
en
ter.
5.
T
urn the rotary control to select the 'Power B' option. Press the rotary control to confirm.
6.
Pr
ess the 'Antelope' button on the interface's top panel to exit the menu.
Note: Make sure the USB power source outputs at least 1A of electric current.
Connect to a smartphone or tablet while charging the
mobile device (reverse charging)
When connected to a mobile device, the Zen Go Synergy Core is able to charge it
simultaneously. The only requirement is that the interface needs to be powered from an
external USB power source, such as adapter, power bank, or powered USB hub. Here's how to
do this:
1. Connect the Zen Go Synergy Core to your mobile device using the USB-C port marked
'AUSB' .
2. Connect the USB power source to the Power USB-C port on the interface.
3. Press and hold the 'HP/MON' button on the interface's top panel to enter the System Menu.
4.
T
urn the rotary control to select the 'Power Source' menu entry. Press the rotary control t
o
en
ter.
5.
T
urn the rotary control to select the ' Charge device A from B’ option. Press the rotary
control to confirm.
6.
Pr
ess the 'Antelope' button on the interface's top panel to exit the menu.
Note: Make sure the USB power source outputs at least 1A of electric current.