User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 27
Additional Controls
Save hardware presets
To save a preset of the current session, including all Control Panel and hardware settings,
to one of the five available slots:
- Press and hold the ‘HP/MON’ and ‘Antelope’ buttons simultaneously
- Navigate to a slot using the rotary knob and press it to save a preset.
Recall hardware presets
To recall a stored preset:
- Press and hold the ‘Gain’ and ‘Antelope’ buttons simultaneously
- Navigate to a preset slot using the rotary knob and press it to load the settings.
Switch between analog input modes
To switch between mic, line and Hi-Z modes on the analog inputs:
- Press the ‘Gain’ button to access the input menu
- Press the rotary knob to switch between the modes.
Enable 48V phantom power
To enable phantom power on the microphone inputs:
- Press the 'Gain' button and make sure mic mode is enabled for the selected input
- Hold the rotary knob until a 48V icon shows on the display screen.
Enable dim function
To enable dim function on the HP or monitor outputs:
- Press the 'HP/MON' button
- Press and hold the rotary knob to enable dim.