User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 38
Settings Window
Monitor Out Trim
Click to choose an audio signal trim value for
the monitor outputs (14dBu - 20dBu). By
default, this option is set to 20dBu. Trim can
be used to compensate for the perceived
volume differences between two or more
sets of speakers so that they produce the
same perceived volume level.
Panning Law
Click to specify Panning Law compensation
between 0dB (none) to -4.5dB. When a
mono input feeds a stereo bus, the panning
law determines how you perceive the sound
level as the audio sweeps from one side of
the stereo field to the other. If panning audio
left and right causes a noticeable difference
in perceived volume level, adjust Panning