User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 48
From top to bottom, the 'Monitors & Headphones' view is organized as follows:
Input selectors
Each mixer channel has its own audio input selector found above it. The inputs are color-
coded. Click on an input selector to make your choice. The following inputs are available:
PREAMP 1 -2
Analog inputs A2 - A1 found on the
interface's rear panel.
EMU MIC 1 - 4
Analog inputs A2 - A1 with Antelope Audio
Edge & Verge Mic Emulations applied. This
way, you can monitor and record 'dry'
microphone audio from PREAMP 1 - 2 and
'mic emulation' microphone audio from EMU
MIC 1 - 2 on different mixer and DAW
channels.
COMPUTER PLAY 1 - 8
DAW Outputs 1 - 8. Assign an audio track to
Output 1 – 8 in your DAW and choose the
COMPUTER PLAY input with the same
number from the input selector. This way,
you can route DAW audio to the interface's
outputs and treat it with Synergy Core FX.
S/PDIF IN 1 - 2
Two channels of incoming S/PDIF stereo
digital audio.
MUTE
No audio input.
OSCILLATOR 1 - 2
Test signals from oscillators 1 and 2.