User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 56
Color
The Color control lets you adjust the overall tone of the reverb. At 0, the space created is
darker, like a lushly carpeted area. At 100, the reverb is at its brightest, which can add some
‘sizzle’ to a lead vocal, for example.
PreDelay
Common for most reverbs, the pre-delay lets you create a bit of space between the source
and the onset of reverb. This happens by controlling the amount of delay time that precedes
the initial sound from the reverb. This parameter is used to place the reverberated signal later
in time with respect to the unprocessed signal.
Natural settings for this are based on the size of the environment and range from 0 to 32
milliseconds. Fine adjustment of this parameter with respect to the tempo of the song or
dramatic timing of the piece can help set the feel of the reverb within the mix.
Early Reflection Gain
This is the linear gain value for all early reflections. These reflections are perceptually grouped
with the direct sound when set at lower levels and can nicely thicken a track when increased.