User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 60
1. Open the Control Panel and head to the leftmost preamp from the PREAMPS row. Click on
the input selector above the 'AFX' area and choose PREAMPS > PREAMP 1 from the menu.
2.
Ch
oose 'Mic' from the signal type drop-down menu and activate 48V phantom power.
3. Click on the mic emulations button to open the mic emulations window. Choose Edge
Solo with the dial.
4. Adjust microphone gain with the gain knobs. You should be hearing mic audio in your
headphones at this point.
Gain Calibration
Gain adjustment for the Edge Solo and Verge is straightforward, but the Edge Duo is a dual-
membrane microphone. There may be differences in the input signal strength from each
membrane, which may have to be compensated for with individual gain adjustments.
Using Mic Emulations
In the ‘Mic Emulations’ window, click and rotate the dial to access the emulations available for
your modeling microphone:
Following is a guide to using the mic emulations for each Antelope Audio modeling
microphone.
Edge Solo