User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 62
● Route the ‘PREAMP’ input for Edge Solo to your desired outputs to monitor ‘dry’ audio.
● Route the ‘EMU MIC’ output for Edge Solo (same number as the ‘PREAMP’ input) to
your desired analog and digital outputs to monitor/record ‘mic emulation’ audio.
● Route ‘PREAMP’ and ‘EMU MIC’ channels to different outputs and record or monitor
from them to get both 'dry' and 'mic emulation' audio.
For more information about Edge Solo, visit its
product page.
Edge Duo
Note to owners of the legacy ‘Edge’ modeling microphone: 'Edge' and 'Edge Duo' have nearly
identical hardware, so feel free to use the ‘Edge Duo’ emulations with your legacy ‘Edge’ mic.
Edge Duo Mic Emulations Window
The following functionality is available:
● Choose mic emulations from the drop-down menu in the middle.
● Click and turn the ‘Phase Invert’ dial to flip the microphone’s polarity.
● Click and drag the ‘48V' switch to activate or turn off phantom power.