User Manual

Antelope Audio Zen Go Synergy Core User Manual
Page 64
Recording and monitoring Edge Duo as a modeling microphone
Make sure that ‘Edge Duo’ mic emulations are enabled. Route the ‘MIC EMU’ inputs
corresponding to the ‘PREAMP’ inputs occupied by Edge Duo to your desired outputs for
monitoring and record from Inputs 1 – 8 in your DAW (e.g. you are using Channel 1 in the mixer,
so you are recording from Input 1).
Recording and monitoring ‘dry’ and ‘mic emulation’ audio simultaneously
With the Edge Duo, monitoring and recording ‘dry’ and ‘mic emulation’ audio simultaneously
means handling four concurrent mono signals – two ‘dry’ tracks and two ‘mic emulation’
tracks. ‘Dry’ audio comes from the ‘PREAMP’ inputs, and ‘Mic Emulation’ audio comes from the
‘MIC EMU’ outputs. Route them anywhere you want and record from Inputs 1 – 8 in your DAW
(e.g. you are using Channel 1 in the mixer, so you are recording from Input 1).
For more information about Edge Duo, visit its
product page.
Verge
Verge is a small-diaphragm condenser microphone that’s as simple to use as the Edge Solo.
Its dimensions and ability to handle high sound pressure levels make it a better fit for
positioning in tight spaces and recording very loud sources, such as drum kits.