User Manual

3. Select your digital source in the monitor source dropdown menu.

4. Go to the Clock tab and under the Source dropdown menu, select Follow Monitor. This

way the Eclipse 384 will be locked to the incoming digital signal. Keep in mind that if you

have USB selected as a source, the clock source will state: Follow Monitor: Oven, and you

will have to manually select the sample rate in order to match it with the one of your USB

device.

5. Wait for the Lock Light to illuminate.

6. In the Clock A section, select Follow Source, if you just want to listen to the source. If your

setup is working in a different sample rate than the one of your source, then choose the

sample rate of your set up on the Clock A dropdown menu.