Installation Guide

ANTICO ELEMENTS - Headquarters: 3520 NW 46Th Street Unit #4 33142 Miami, Florida United States
We strongly suggest securing the panels with construction adhesive (Liquid Nails, PL Premium etc.) as well as fasteners such as
screws or nail. The brick panels may be installed directly over drywall, plywood or framing. In cases of bare framing apply the
adhesive on the framing itself. When installing on a flat surface the adhesive may be applied on the back of the panels:
Secure the panel on the substrate using screws or finish nails (using nails will help to conceal the heads). It is important to apply
plenty of adhesive on the flat overlapping areas, where panels overlap, to have strong bond between panels.
Continue with the rest of the panels of the first row. If the faux brick panels terminate against another wall, simply cut the panel
to size. The exposed edges will be hidden by the next wall. It is always better to mark your dimensions in the back of the panels
to make cuts. You may also caulk any joint between panels and touch them up with paint. We recommend starting the next and
all odd rows with half panel in order to stagger the vertical seam and creating a better flow.
Mitering Corners
When it is necessary to turn around a corner we suggest mitering a panel, just like you would do with moldings. As mentioned
above, the ideal saw for this particular project is a table saw BUT you can also use a circular saw with a straight edge.
Installation Instructions forTBBR-2745 White Brick Panel
Page 2