Instructions / Assembly

5. Wiring
Outlet box
Mounting
bracket
Canopy
Screw Screw
Step 1. Insert the wires and wire connec-
tors into the outlet box.
Step 2. Slide the canopy upto the ceiling
and attach it to the mounting bracket with
the screws provided. Tighten all screws
securely.
Step 1. Connect the fan black wire to
your house live wire, white wire to your
neutral wire, yellow/green wire from the
downrod to your ground wire.
Step 2. After connecting the wires with
wire nuts, spread them apart so that the
live wires are on one side of the outlet
box and the neutral wires are on the
other side.
6. Attaching the Canopy
NOTE: THIS FAN ONLY NEEDS ONE
SET OF INPUT WIRES (black, white
and ground wire). Both of the fan and
lights will be controlled by the remote
controller. The wall switch is not able to
control the fixture full functionally.
THIS FAN CAN ONLY BE
CONNECTED ONTO ON/OFF SWITCH
IF YOU HAVE ONE, NOT SUITABLE
FOR DIMMAER SWITCH.
6
Fig. 4
Fig. 5