Instructions / Assembly

Trouble Shooting
1. Fan doesn't work
• Press a fan speed button (1-3).
• Check the remote control battery (not included in this package).
• Check the circuit breaker to ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen the canopy and check all the
connections according to the wiring diagram.
2. Bulbs do not light up
• Check your power and switch to make sure it's power on.
• Check the bulb to make sure it's installed correctly
• Change a new bulb.
• Check the wires to make sure they are connected correctly.
4. Noisy operation
• Tighten the light fitting
• Re-tighten all screws on bracket, downrod and fan blades (do not over tighten)
• Check to see if any of the blades are cracked. If so, replace all of the blades.
Magnet
5. Remote does not work
• Make sure the battery is installed correctly.
• Install 2 new batteries.
6. Excessive wobbling
• Tighten all of the blade screws.
• Turn off power, support the fan carefully,
and check that the hanger ball is properly
seated.
• Use the provided balancing kit and
instructions to balance the fan:
Step 1. Attach the magnet to place①, ②, ③
or ④, turn on the fan and test where it needs
the balance kit.
Step 2. Replace the magnet with the balance
paster.
Balance paster
9 Email: [e-mail]