Instructions / Assembly

5. Installing Bulb and Light Shade
NOTE: This fan light is not dimmable, it can not be dimmed even with dimmable
bulbs.
Step 3. Fix the bulb holder onto the
threaded tube with cap nut on it. Install
bulbs (E26/E27 Max. 60W each). NOTE:
For 42" fan, bulb length should be no
more than 5.7 inch/ 14.5cm.
Step 4. Take off screws from the base,
attach the frame onto the base with
screws taken off.
Step 1. Screw the bulb holder hub onto
the center of fan base. Pass the wires
through the side hole.
Step 2. Take off the threaded tube from
the bulb holder, screw it into the hub and
fix it with a screw. Connect the wires from
the bulb holder to the ones from the fan.
14.5cm
7 Email: [e-mail]