Retractable Ceiling Fans Model No.
Please contact us with following information: 1. Screen shot of your order page, including product picture, name and order ID number. 2. Problem details with pictures / short video if possbile. Email: homechandelier@qq.com 1 Email: homechandelier@qq.
Packing List ① ⑥ ⑩ ② ⑦ ③ ④ ⑧ ⑤ Name ⑨ QTY Name QTY ①Mounting Bracket 1 ⑦ LED Driver 1 ② Canopy 1 ⑧ Remote Control 1 ③ Downrod 2 ⑨ Hardware Bag 1 ④ Adapter Cover 1 ⑩ Light Shade 1 ⑤ Fan Motor Assembly 1 ⑥ LED Panel 1 Please open your package and check the accessories according to the packing list. NOTE: 1. Downrod: short x 1pcs, long x 1pcs 2. Remote control requires AAA 1.5V battery x 2pcs (not included) Email: homechandelier@qq.
Safety Rules 1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock. 2. A qualified licensed electrician is required for the installation. 3. The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds.
1. Installation Preparation Tools You Need Ladder Wire Strippers Pliers Screwdrivers Power Drill (optional) Drill Bit (optional) If mounting to a support structure, you will also need the optional tools. What to Expect with Your Installation You may need a friend to help you. 30 inches from blade tip to nearest wall or obstruction Ceiling angles greater than 22° will require an Angled Mounting Kit.
2. Installing the Fan Outlet box NOTE: This ceiling fan is supplied with two types of hanging downrods: 1. The short downrod for "close-to and flat ceiling" installation (less than 9 feet). Mounting 2. The long downrod for high or angled ceiling less bracket Hook than 22°. 3. Please contact us if you need longer downrod Power Wire or angled ceiling greater than 22°. Flat washer Mounting screw (supplied with the outlet box) Fig. 5 1. Installing the Bracket Step 1.
3. Wiring White Ground wire Green/yellow Black Black Fan Wires White House Wires NOTE: THIS FAN ONLY NEEDS ONE SET OF INPUT WIRES (black, white and ground wire). Both of the fan and lights will be controlled by the remote controller. The wall switch is not able to control the fixture full functionally. Outlet box THIS FAN CAN ONLY BE CONNECTED ONTO ON/OFF SWITCH IF YOU HAVE ONE, NOT SUITABLE FOR DIMMAER SWITCH. Step 1. Connect the fan live wire (black) to your house live wire (black). Step 2.
5. Installing Bulb and Light Shade Model No.: HY-8366 Step 1. Get ready for the fan motor assembly (see the previous instruction). Step 2. Attach the LED panel and LED driver onto the pan by the magnet. Step 3. Connect the LED driver to the power wire and the LED panels. NOTE: 1. LED driver and wire connector maybe different from the picture. 2. Please make sure the LED panels will not touch with the LED driver, the frame and the fan base except for the magnets. 7 Email: homechandelier@qq.
Continue Step 4. Attach the threaded tube to the center of the base. Adjust hex nut to a proper height. Step 5. Attach the shade cover with the cap nut provided. NOTE: 1. LED driver and wire connector maybe different from the picture. 2. Please make sure the LED panels will not touch with the LED driver, the frame and the fan base except for the magnets. Email: homechandelier@qq.
LED Wiring Details-1 LED Panel LED driver A B E D C A. LED driver input wire: connects to fan base B. LED driver output wire: connects to LED panel input slot C C. LED panel input slot: connects to LED driver output wire B D. LED panel ending slot: inserted with a circuit adapter E E: Circuit adapter NOTE: 1. Please connect the LED driver to the LED panels according to the arrow direction on the panels. 2. Please do not take out the circuit adapter from the ending slot. 3.
LED Wiring Details-2 LED Panel C B LED driver D E D. Ending slot E. Circuit adapter Please do not change the connection if the LED panels are already assembled. Email: homechandelier@qq.
Remote Control Instructions ① ⑨ ② ⑩ ⑪ ③ ④ ⑤ ⑥ ⑫ ⑬ ⑭ ⑦ ⑮ ⑯ ⑧ NOTE: Please insert 2 batteries before using. AAA 1.5V battery x 2pcs (not included) ① Turn on/off the light. ② Quick switch of the light color: warm white→cool white→daylight white ③⑫ Adjust the light color temperature. ④ SETUP: remote signal pairing. If the remote control looses signal of the fan, press this button at the very beginning after it's turned on from wall switch. After the signal light flashes for 3 times, it's done.
Trouble Shooting 1. Fan doesn't work • Press a fan speed button (1-3). • Check the remote control battery (not included in this package). • Check the circuit breaker to ensure the power is turned on. • Make sure the blades spin freely. • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram. 2. LED panel doesn't light up • Check the wire connectors to see if all of them are connected correctly.
7. LED panels flicker/ Noisy operation • Check the LED panel to make sure it's installed correctly. • Make sure you only connect the fan onto your ON/OFF switch if you have one, not a dimmer switch. Clean And Care To clean, wipe fixture with soft cloth. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture. Ordering Parts Keep this manual for future reference, and in case replacement parts are needed.
Hazardous substance Email: homechandelier@qq.
"We followed the light to a brighter and warmer place.
