Instructions / Assembly

Remote Control Instructions
NOTE:
Please insert 2 batteries before using.
AAA 1.5V battery x 2pcs (not included)
① Turn on/off the light.
② Quick switch of the light color: warm white→cool white→daylight white
③⑫ Adjust the light color temperature.
④ SETUP: remote signal pairing. If the remote control looses signal of the fan,
press this button at the very beginning after it's turned on from wall switch.
After the signal light flashes for 3 times, it's done.
⑤⑪ Adjust the brightness of the light.
⑥ Fan moves forwards or reversely.
⑦⑧⑯ Fan speed.
⑨ Turn off fan including the light.
⑩ Night mode, lights will be dimmed when press this button.
⑬ Timing for 2 hours for the fan.
⑭ Natural wind of the fan, fan speed will change automatically when use this
function.
⑮ Turn off the fan.
11 Email: [e-mail]
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯