Use and Care Manual

CRYSTAL CLEAR COAT

WATER BASED SEALER

100% ACRYLIC

RESIN: 100% Acrylic

COLOR: Clear Satin Sheen

SOLIDS BY WEIGHT: 28 %

VISCOSITY: 52KU@75F

WEIGHT PER GALLON: 8.56 lbs.

FLASH POINT: None

RECOMMENDED COVERAGE:

200 sq. ft. per gallon, per

coat, depending on the porosity

and age of the concrete surface.

DRYING TIME@70F&50%RH:

To touch: 2 hours

72 hours for vehicle tra c

Drying times are in uenced by

ambient temperature and relative

humidity.

CLEANUP: Soap & Water

VOC: 94.7 grams/liter

1320

AVAILABLE SIZES

5 GALLON PAIL

PAGE 1
C RYS TA L C L E A R COAT WAT E R B A S E D S E A L E R 1 0 0 % AC RYL I C RESIN: 100% Acrylic COLOR: Clear Satin Sheen SOLIDS BY WEIGHT: 28 % VISCOSITY: 52KU@75F WEIGHT PER GALLON: 8.56 lbs. FLASH POINT: None RECOMMENDED COVERAGE: 200 sq. ft. per gallon, per coat, depending on the porosity and age of the concrete surface. DRYING TIME@70F&50%RH: To touch: 2 hours 72 hours for vehicle traffic Drying times are influenced by ambient temperature and relative humidity.
PAGE 2
USES, FEATURES & BENEFITS Anvil 100% Acrylic Crystal Clear Coat Sealer is a water-based, non-yellowing clear coating for sealing concrete, pavers, Chattahoochee and Exposed Aggregate concrete, residential driveways, walkways patios and decks. Delivers a satin sheen when applied to a properly prepared surface and is highly resistant to the effects of hot automobile tires and water blushing. It is formulated for use on exterior/interior surfaces.