Datasheet

Industrial networking made easy! www.anybus.com
M-Bus to Modbus-TCP gateway
The Anybus M-Bus to Modbus-TCP gateway allows M-Bus devices to
communicate on a Modbus-TCP network. The gateway decodes M-Bus
telegrams making it possible to map meter values to Modbus registers.
This enables central control and supervision of measuring devices which
usually use the M-Bus protocol.
Make M-Bus measuring devices talk Modbus-TPC
The Anybus M-Bus to Modbus TCP gateway decodes M-Bus
telegrams for easy overview and mapping of meter values. You
can connect up to 20 or 80 M-Bus slaves and enable them to
communicate on a Modbus-TCP network.
Connect to any other network with an X-gateway
You can also connect your M-Bus devices to any
other industrial network by pairing the M-Bus
gateway with an Anybus X-gateway for Modbus-TCP.
This easy-to-use gateway creates a connecon from
Modbus-TCP to any other industrial network.
What you get:
• Get data on your consumpon of electricity, water or gas
onto Modbus-TCP (or any industrial other network).
• Enable total overview of your site’s consumpon, including
building parameters (electricity, water, gas etc.)
• Easy web-based conguraon tool. No programming
required.
• No hardware or soware changes are required for the
connected M-Bus device.
• Global free technical support and consultancy.
Typical Industries
HMS provides a
full 3 year product
guarantee
Easy conguration
The accompanying web-based
conguraon tool allows you to set
up the gateway in an easy-to-use web
interface. No programming is necessary.
View a conguraon video at
www.anybus.com
Connect. Congure. Done!
Order number:
024380 (20 loads)
020570 (80 loads)
Connect to other networks
with Anybus X-gateways:
Network Order no
CANopen Slave AB9004
CC-Link Slave AB9009
ControlNet Adapter AB9003
DeviceNet Adapter AB9002
EtherCAT Slave AB9000
EtherNet/IP Adapter AB9006
Modbus RTU Slave AB9005
PROFIBUS Slave AB9001
PROFINET-IO Device AB9007
PLC
Modbus-TCP
M-Bus devices
APPLICATION EXAMPLE: