Data Sheet

Anybus® is a registered trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other countries. Other marks and words belong to their respecve companies.
All other product or service names menoned in this document are trademarks of their respecve companies.
Part No: MMA103 Version 6 03/2019 - © HMS Industrial Networks - All rights reserved - HMS reserves the right to make modicaons without prior noce.
Communicator RS-232/422/485
Protocol Congurable RS-232/422/485 based produce/consume, query/response ASCII
Max stations 31 (with RS485/422)
Baud rate 1,2-57,6 kbit/s
Physical standards RS232/422/485
Modbus Commands 0x01 Read Coils, 0x02 Read Discrete Inputs, 0x03 Read Holding Registers,
0x04 Read Input Registers, 0x05 Write Single Coil, 0x06 Write Single Register,
0x07 Read Exception Status, 0x08 Diagnostics, 0x0B Get Comm Event Ctr, 0x0C Get
Comm Event Log, 0x0F Write Multiple Coils, 0x10 Write Multiple Registers, 0x11 Report
Slave ID, 0x14 Read File Record, 0x15 Write File Record, 0x16 Mask Write Register,
0x17 Read/Write Multiple Registers, 0x18 Read FIFO Queue
Customized commands can be created (in the Anybus Conguration Manager)
DF1 Services 0x01 Integrity Check, 0x02 Read Diagnostics, 0x03 Read Data, 0x04 Write Data
Customized services can be created (in the Anybus Conguration Manager)
Technical Details Standard
Technical Details Standard
Weight 150 g, 0,33 lb
Dimensions (L•W•H) 120•75•27 mm, 4,72•2,95•1,06”
Protection class IP20, NEMA rating 1
Enclosure material PC ABS, UL 94
Installation position Any
Mounting DIN rail (35•7,5/15) EN 50022
Certications
UL File number: E203225 UL 508 Ind. Cont. Eq.
Hazardous Locations CLASS 1, DIVISION 2, GROUPS A, B, C AND D, T4 ISA 12.12.01
CE 2004/108/EC EN 61000-6-4
EN 61000-6-2
Electrical Characteristics
Power 24 VDC +/- 10 %
Current consumption Max 300 mA, Typical 100 mA
Hardware Characteristics
Reverse voltage protection Yes
Short circuit protection Yes
Galvanic isolation on subnetwork Yes EN 60950-1
MTTF >550 000 h Telcordia Issue 2, Method 1
Case 3 at 30
o
C
Environmental Characteristics
Operating temp 0 to 55
o
C, 32 to 131
o
F
Storage temp -40 to 85
o
C, -40 to 185
o
F
Relative Humidity 0-95% non condensing
Installation altitude up to 2 000 m
Immunity and emission for industrial environment
Electrostatic discharge +/- 4 kV EN 61000-4-2
Electro magnetic RF elds 10 V/m 80 MHz - 1 GHz
3 V/m 1,4 GHz - 2,0 GHz
1 V/m 2,0 GHz - 2,7 GHz
EN 61000-4-3
Fast Transients +/- 1 kV EN 61000-4-4
Surge protection +/- 1 kV EN 61000-4-5
RF conducted interference 10 V/rms EN 61000-4-6
Emission (at 10 m) 40 dB 30 MHz - 230 MHz
47 dB 30 MHz - 1 GHz
CISPR 16-2-3
Single Pack Accessories
• Conguration Cable (RS232) Port • Installation sheet • Dsub with screw terminals for sub network
TECHNICAL SPECIFICATIONS
NETWORK SPECIFIC FEATURES
1 = Network connector, 2 = Baud rate,
3 = I/O data, 4 = Other
Power connector
with screw terminals
Status LEDs
Conguration switches
(if existing, behind lid)
Network connector
(see number 1 above)
DIN rail connector
Conguration port
RS subnetwork
connector (DSUB 9-Pole
female)
CANopen
1 = DSUB9M 2 = Up to 1 Mbit/s
3 = 512 byte IN/OUT 4 = Supports prole CIA DS301 V4.02
CC-Link
1 = 1*5p; 5.08 Phoenix Plug 2 = Up to 10 Mbit/s
3 = 896 IO points, 128 word IN/OUT 4 = Up to 4 occupied stations, 8
extension cycles
CC-Link IE
Field
1 = 2*RJ45 2 = 1 Gbit/s Fixed
3 = 832 IO Points, 204 word IN/OUT 4 = CC-Link IE Field Network, Intel-
ligent Device Station
ControlNet
1 = 2*BNC Coax + RJ45 (NAP) 2 = 5 Mbit/s
3 = 450 byte IN/OUT 4 = Communications adapter, prole n. 12
DeviceNet
1 = 1*5p; 5.08 Phoenix Plug 2 = 125-500 kbit/s
3 = 512 byte IN/OUT 4 = Communications adapter, prole n. 12
EtherCAT
1 = 2*RJ45 2 = 100 Mbit/s
3 = 512 byte IN/OUT 4 = DS301 V4.02 compliant, 4 FMMU Channels
EtherNet/IP
1 = RJ45 2 = 10/100 Mbit/s 3 = 504 IN/OUT
4 = EtherNet/IP group 2 and 3 server. Modbus/TCP slave functionality
EtherNet/IP
2-port
1 = 2*RJ45 2 = 10/100 Mbit/s 3 = 504 IN/OUT
4 = EtherNet/IP group 2 and 3 server. Modbus/TCP slave functionality
FIPIO
1 = DSUB9M 2 = 1 Mbit/s 3 = 32 words IN/OUT (cyclic)
4 = Data exchange according to FIPIO Extended Device Prole, Class 0
Interbus
1 = DSUB9F + DSUB9M 2 = 500 kbit/s, 2 Mbit/s
3 = 20 byte IN/OUT (process data), 512 bytes IN/OUT (with PCP)
4 = Interbus PCP V.2.0
Modbus Plus
1 = DSUB9F 2 = 1,2-57,6 kbit/s
3 = 32 words IN/OUT (global data), 512 words IN/OUT (register data) 4 = -
Modbus RTU
1 = DSUB9F 2 = 1,2-57,6 kbit/s 3 = 512 byte IN/OUT 4 = RS232 and
RS485
Modbus TCP
1 = RJ45 2 = 10/100 Mbit/s 3 = 512 byte IN/OUT
4 = Class 0, 1 and partially class 2 slave functionality
PROFIBUS
1 = DSUB9F 2 = Up to 12 Mb
3 = 244 IN/OUT (416 total) 4 = Probus DP (IEC 61158)
PROFINET IO
1 = RJ45 2 = 100 Mbit/s 3 = 512 byte IN/OUT
4 = RT Communication and Cyclic data exchange
PROFINET
IRT - 2 port
1 = 2*RJ45 2 = 100 Mbit/s 3 = 220 byte IN/OUT
4 = RT and IRT Communication
HMS Industrial Networks – Worldwide
HMS - Sweden (HQ)
Tel : [phone] (Halmstad HQ)
E-mail: [e-mail]
HMS - China
Tel : [phone]
E-mail: [e-mail]
HMS - France
Tel: [phone] (Mulhouse ofce)
E-mail: [e-mail]
HMS - Finland
Tel: [phone]
E-mail: [e-mail]
HMS - Germany
Tel: [phone]
E-mail: [e-mail]
HMS - India
Tel: [phone]
E-mail: [e-mail]
HMS - Italy
Tel : [phone]
E-mail: [e-mail]
HMS - Japan
Tel: [phone]
E-mail: [e-mail]
HMS - Switzerland
Tel: [phone]
E-mail: [e-mail]
HMS - UK
Tel: [phone]
E-mail: [e-mail]
HMS - United States
Tel: [phone]
E-mail: [e-mail]