Brochure
17
RESIDENTIAL GAS
Power Venting Made Simple
• Thru-the-wall or thru-the-roof power venting
using either 2” or 3” PVC. ABS or CPVC vent
pipe.
Intelli-Vent
™
Gas Control
• Advanced electronics for more precise control
of water temperature and easy to understand
system diagnostics.
Combination Thermostat/ECO
• Utilizes an intermittent ignition gas valve (no
standing pilot) with thermistor temperature
sensor and built-in high temperature cut off.
Quiet and Efficient Blower
• Factory-installed 6-foot power cord with standard
3-prong male connector provided. Electrical
requirements; 110/120 VAC power source less
than 5 amp draw.
Dynaclean
™
Diffuser Dip Tube
• Reduces lime and sediment buildup and
maximizes hot water output. Made from long-
lasting PEX cross-linked polymer.
Coregard
™
Anode Rod
Green Choice
®
Gas Burner
• Complies with SCAQMD Rule 1121 and other
air quality management districts with similar
requirements for NOx emissions of less than
10 ng/J.
Enhanced-Flow Brass Drain Valve
Code Compliance
• Meets UBC, CEC and HUD National Codes.
• Meets the thermal efficiency and standby loss
requirements of the U. S. Department of Energy
and current edition of ASHRAE/IES 90.1.
• Complies with the Federal Energy Conservation
Standards effective April 16, 2015, in accordance
with the Energy Policy and Conservation Act,
(EPCA), as amended.
Design-Certified by CSA-International
• Certified at 300 psi test pressure and 150 psi
working pressure.
• Listed according to ANSI Z21.10.1-CSA 4.1
standards governing storage tank-type gas water
heaters.
6-Year Limited Tank and Parts Warranty
• For complete information, consult written
warranty or go to hotwater.com
PROLINE
®
XE HIGH EFFICIENCY
NON-CONDENSING ULTRA-LOW NOx
POWER VENT