Wireless-G Router User Guide

ADSL 4-Port Ethernet USB Wireless-G Router User Guide
ADSL 4-Port Ethernet USB Wireless-G Router User Guide Page 45 of 52
5.6.24 Restore to Default
The restore to factory defaults feature will set the ADSL Router to its factory default
configuration by resetting the ADSL Router. You may need to place the ADSL Router into its
factory defaults if the configuration is changed, you lose the ability to interface to the ADSL
Router via the web interface, or following a software upgrade,. To reset the ADSL Router,
simply press the reset button for about ~ 10 seconds. The ADSL Router will be reset to its
factory defaults and after about 30 ~ 40 seconds the ADSL Router will become operational
again.
A prompt as the one shown in Fig 1-42 will pop-up.
Figure 1-42 : Restore to Default prompt
5.7 Security
The security feature section allows users to configure the following:
•
••
• IP Filters
•
••
• LAN Isolation
•
••
• URL Filters
Figure 1-43 : Security