Product Datasheet/Brochure

SAVE THESE INSTRUCTIONS – This manual contains important

instructions that should be followed during installation and maintenance of

the Schneider Electric equipment and batteries.

General Safety Information

• This UPS is intended for indoor use only.

• For a UPS with a factory installed power cord, connect the UPS power

cable directly to a wall outlet. Do not use surge protectors or extension

cords.

• The UPS cord shall be connected to an earthed mains socket outlet for

safety reasons.

Battery Safety

• A battery can present a risk of electric shock and burns by high short-

circuit current.

• Failed batteries can reach temperatures that exceed the burn thresholds

for touchable surfaces.

• Before installing or replacing the batteries, disconnect the charging

source prior to connecting or disconnecting battery terminals. Do not

wear any metal objects including watches and rings. Do not lay tools or

metal parts on top of batteries. Remove conductive jewelry such as

chains, wrist watches, and rings. High energy through conductive

materials could cause severe burns.

• Servicing of batteries should be performed or supervised by personnel

knowledgeable about batteries and required precautions.

• When replacing batteries, replace with the same type and number of

batteries or battery packs.

• CAUTION: Do not dispose of batteries in a fire. The batteries may

explode.

• CAUTION: Do not open or mutilate batteries. Released material is

harmful to the skin and eyes and may be toxic.

Important UPS Safety Information

SAVE THIS GUIDE

owned by Schneider Electric Industries S.A.S., or their affiliated companies.

All other trademarks are property of their respective owners.

EN 990-6155-024

4/2019