Product Datasheet/Brochure

6
Back-UPS BVN650M1, BVN650M1-CA, BVN900M1, BVN900M1-CA
Status Indicators
Status
Power Button
illumination
Audible
Indicator On
Audible Indicator
Terminates
Power On
The Back-UPS is supplying AC power to
connected equipment.
Solid green
None
N/A
On Battery
Back-UPS supplying battery power to
battery backup outlets.
Solid green
and flashes
twice every 2
seconds.
The audible
alarm depends
on the On
Battery
Indicator mode
setting. See the
On Battery
Indicator
Modes section
for full details.
- Using Quick Mute.
- Beeping stops when
AC power is restored
or the Back-UPS is
turned off. Applies
only to modes where
the on battery alarm is
audible.
Low Battery notification
The Back-UPS is supplying battery
power to the battery backup outlets and
the battery is near a total discharge state.
Flashes green
in rapid
succession.
Low Battery shutdown
The battery has been completely
discharged while the Back-UPS is on
battery, the UPS will shut down.
None
- AC power is restored.
- AC is not restored
within 32 seconds
- The Back-UPS is
turned off.
Sleep Mode
The UPS has shut down and will
“awaken” once AC power is restored.
None
None
N/A
Replace Battery
The battery is disconnected.
The battery needs to be charged, or
replaced.
Alternates
green-red
Constant
tone
- Back-UPS is turned
off.
- If battery is
disconnected, unplug
the Back-UPS from
AC source and then
turn it off. Refer to the
section Connect the
Battery” on page 2.
- If battery needs
replacement, refer to
the section “Battery
Replacement” on
page 8 for details.
Detected Overload
An overload condition has occurred in
one or more of the battery backup outlets
while operating on battery power.
Green-red
alternately
flashing
Beeping
(every 0.5
second)
N/A
Overload Shutdown
An overload condition has occurred in
one or more of the battery backup outlets
while the Back-UPS is operating on AC
power.
None
Constant
tone
If overload occurs in line
mode, Back-UPS will
enter fault mode. If
overload occurs in battery
mode, Back-UPS can be
turned off.