Owners manual

- 6 -

Delayed On Status Indicator

When lit, power is ‘on’ at those outlets.

Line Trim Status Indicator

When lit, the Automatic Voltage Regulation (AVR) is engaged

to correct high input voltage conditions.

Select Push Button

This push button is used to select various setup functions such

as: Dimmer, AVR Range, Delay Time, Beeper, or Language

(English, French, or Spanish).

Backlit LCD Display

Provides status information about the equipment plugged into

the unit, as well as unit status. Information contained in the dis-

play can be viewed in English, French, or Spanish. The display

and indicators can also be dimmed (using Dimmer menu), or

can be completely darkened.

Note: The backlit display, as well as the LEDs, can be dimmed

or turned off using the Setup push button and Dimmer function.

On/Off switch

Controls power to all 12 outlets. APC recommends the unit be

left ‘on’ at all times.

Overload Status Indicator

This indicator will illuminate when the unit is overloaded;

unplug equipment connected to the unit until the indicator is no

longer lit.

Setup Push Button

This push button is used to show all information provided in the

backlit LCD display, as well as set up various functions pro-

vided by the unit such as: Dimmer, AVR Range, Delay Time,

Beeper, or Language (English, French, or Spanish).