Owners manual

- 8 -

AC-Powered Outlets

The H15 Power Conditioner provides for connection of up to

twelve (12) AC-powered devices. The outlets are arranged

according to the type of filtering protection provided for a given

application. These Isolated Noise Filter Banks eliminate elec-

tromagnetic and radio frequency interference that can nega-

tively impact sound and video quality. APC recommends you

plug your devices into the outlets as marked, in order to assure

optimum protection for your equipment. The outlets are further

defined in the following:

Digital Filter Outlets provides filtering of the incoming AC

power to protected your most sensitive digital devices (CD,

DVD, DVR, CATV/SAT, Monitor, and AUX (one auxiliary dig-

ital device).

Note: Any digital device can be plugged into the digital outlets,

any video device can be plugged into either of the video outlets,

etc. Example, if you have a cable box and a satellite receiver,

but no monitor, you can plug the cable box into the "CATV/

SAT" outlet, and the satellite receiver into the "Monitor" outlet.

Video Filter Outlets provide filtering for your video devices

(TV and VCR).

Analog Filter Outlets provide filtering for your analog-based

equipment (Tuner/AUX and Preamp/Receiver).

High Current Filter Outlets provide filtering for your high-

current devices (Subwoofer and Amplifier).

Surge Protected COAX/RF Connectors

The H15 provides a cable splitter for your CATV system or

Cable Modem. The surge protection feature prevents surges

traveling over Coaxial data lines from damaging the system.

Connect the coaxial cable from the CATV or Cable Modem

provider to the connector marked “IN”, connect other cables

from the connectors marked “OUT” to the device being pro-

tected (CATV box or Cable Modem).