Owners manual

- 10 -

Surge Protected Telephone Jacks

The H15 provides a telephone line splitter with surge protection

to protects components connected via telephone line. Connect

the supplied RJ11 Telephone cable from the wall jack (source)

to the telephone line connector marked “IN”. Connect other

telephone cables to the connectors marked “OUT A” and/or

“OUT B” and then to the equipment to be protected (Telephone,

DVR, DSS, or DSL).

Additional Surge Protected COAX/RF Connectors

The H15 also provides a surge protection for your DSS system

or RF Antenna system. The surge protection feature prevents

surges traveling over Coaxial cable from damaging the equip-

ment. Connect the coaxial cable from the DSS or Antenna sys-

tem to the connector marked “IN”, connect another coaxial

cable from the connector marked “OUT” to the device being

protected (DSS or Antenna).