Owners manual

- 18 -
Federal Communications Commission (FCC) Compliance Information
This device complies with Part 68 and Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device must not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation. As
required, the bottom of this equipment contains, among other information,
the Registration Number and Ringer Equivalence Number (REN) for this
equipment. If requested, this information must be provided to the
telephone company.
DC Trigger Two 3.5mm mini-jack plugs
(5-30V)
CAUTION: When connecting to the DC Trigger jacks, connect the
source of the DC trigger to the IN jack. The OUT jack should be used
only as a pass-through. The DC Trigger signal can be short circuited if
the input and output cables are reversed. The maximum input voltage
for the DC Trigger is 30VDC. Do not apply an AC voltage to the DC
trigger jacks. Failure to comply with this statement may result in equip-
ment damage.
Physical Dimensions (H x W x D) 3.75 x 17 x 9.5”
Unpackaged Weight
Shipping Weight
16.7 lbs.
22.4 lbs.
Safety Agency Approvals UL1449, cUL, FCC Part 68
Class B, NOM