Instructions / Assembly

COPY RIGHT APEC, 2016 Re-order filters at: FreeDrinkingWater.com 1-800-880-4808
How to Replace Last Stage Post Carbon Filter: (FI-CAB12-QC)
Replace this last filter at the same time you replace the membrane.
1) Locate the last stage carbon filter. See Fig.B
2) Remove the OLD filter: Disconnect the input tubing at Point G. and tubing at Point H.
Discard the old filter. See Fig.B
To disconnect: Push in and hold down on the collet ring square against the fitting. With the collet held
in this position the tubing can be removed.
3) Remove the 2 end plugs from the new filter to open up the parts.
4) Reconnect the input and output tubing. Make sure the “Flow ” on the filter is pointing to the pure
water output direction.
5) Check for leaks.