Instructions / Assembly

ManualsBrandsAPEC Water Systems ManualsKitchenAPEC Whole House System Single Tank Installation Kit for Water Filter or Water Softener System

WHOLE HOUSE INSTALLATION KIT INSTRUCTION (Single System)

COMPONENTS INCLUDED:

QC = Quick Connection

John Guest

Connector

(1’’NPT X1’’D)

Teflon

tape

x 1

I. PREPARING PRE-FILTER HOUSING FOR INSTALLATION INSTRUCTIONS.

Step 1. Please wrap Teflon tape 1-2 times on the thread of V1001 and V1002. See Fig.1.

Fig.1

V1001

V1002

Quick

Connection

Stainless Steel

Flexible Pipe

(1’’D X 24’’ L)

x 2

PIPE1002

x 1

V1001

John Guest stem

Connector

(1’’NPT X1’’D)

x 3

V1002

V1001

* Please read and become familiar with instructions and parts needed before proceeding with

the installation.

* Recommend using a Licensed Plumber to install these products.

Summary of content (5 pages)

PAGE 1
WHOLE HOUSE INSTALLATION KIT INSTRUCTION (Single System) * Please read and become familiar with instructions and parts needed before proceeding with the installation. * Recommend using a Licensed Plumber to install these products. COMPONENTS INCLUDED: x1 V1001 x3 V1002 John Guest Connector (1’’NPT X1’’D) John Guest stem Connector (1’’NPT X1’’D) x2 PIPE1002 x1 Teflon tape Quick Connection Stainless Steel Flexible Pipe (1’’D X 24’’ L) QC = Quick Connection I.
PAGE 2
Step 2. Screw V1001 into the housing INLET connection, and screw V1002 into the housing OUTLET connection. See Fig.2. Pre-filter Housing Fig.2 V1001 V1002 Step 3. Hand-tighten V1001 and V1002, using a wrench to tighten with 1-2 turns. (Do not over tighten) See Fig.3. Pre-filter Housing Fig.
PAGE 3
II. INSTALLATION INSTRUCTION: Step 1. Connect the main water pipe into the Pre-filter Housing INLET securely just by pushing the pipe into V1001. After inserting pipe, please slightly pull on the pipe to ensure the water pipe connection is completely secured. See Fig.4. Step 2. Push PIPE1002 Quick Connect port into the Pre-filter Housing OUTLET of V1002, please slightly pull on the flexible pipe to ensure the flexible pipe connection is completely secured. See Fig.4. Pre-filter Housing Fig.
PAGE 4
Step 3. Connect flexible pipe PIPE1002 from the Pre-filter Housing OUTLET, into the INLET of the bypass valve on the water treatment system, screw the compression fitting. Hand-tightening is recommended. See Fig.5. Stage 1 APEC Carbon System Bypass Valve In Out Fig.5 Pre-filter Housing Compression Fitting PIPE1002 Step 4. Connect PIPE1002 into the OUTLET of Stage 2 bypass valve, screw the compression fitting. Hand-tightening is recommended. See Fig.6. Step 5.
PAGE 5
SPECIAL NOTE FOR HOMES WITH PVC PIPE ONLY: Quick Connection port is designed to ONLY connect to COPPER, CPVC, and PEX pipe. We have included 2 additional V1002 (stem connector) to connect your PVC pipe to the whole house connection kit. You can quickly insert the V1002 stem end into QC port of PIPE1002 and INLET side of pre-filter housing and thread your PVC adapter to the 1’’ Male threaded NPT End of V1002. See Fig.7.