Datasheet

ManualsBrandsApem ManualsSwitchesToggle Switch, (ON)-OFF-(ON), 1CO

A-108 APEM www.apem.com

3500 series

High performance toggle switches - environmentally sealed

Distinctive features and specifications

❑

Completely sealed switches withstanding 0,1 bar pressure

• Frontal sealing to IP67 or IP69K by a silicone membrane

(for sealed panel mounting, add washer U60, section I).

• Rear sealing to IP 64 provided by moulded-in terminal inserts

❑

Approved to European standards CECC 96000

❑

Three types of terminals

❑

Many lever styles available

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load and electrical life at full load:

see table below

• Initial contact resistance : 10 mΩ max. at 1A 2VDC

• Insulation resistance : 1.000 MΩ

• Dielectric strength : 2.500 Vrms 50 Hz min. between terminals

3.000 Vrms 50 Hz min. between terminals and frame

FUNCTIONS

ON-OFF

and

ON-ON

6.000 cycles, T65°C

20A 125VAC, 3/4HP

15A 250VAC, 1-1/2HP

T5, 115VAC, 50/400Hz

6.000 cycles, T65°C

18A 125VAC, 1/2HP

10A 250VAC, 1/2HP

T2, 115VAC, 50/400Hz

6.000 cycles, T65°C

15A 125VAC

10A 250VAC

T2, 115VAC, 50/400Hz

10.000 cycles, T20°C

15A 28VDC resistive

15A 28VDC inductive

5A 28VDC lamp load

10.000 cycles, T20°C

15A 28VDC resistive

15A 28VDC inductive

5A 28VDC lamp load

10.000 cycles, T20°C

15A 28VDC resistive

10A 28VDC inductive

3A 28VDC lamp load

ON OFF ON

OTHER

FUNCTIONS

Alternate current Direct Current

According to

CECC

96201-004

10.000 cycles

16A 250VAC

15A 32VDC

GENERAL PERFORMANCES

MATERIALS

• Case : mineral filled polyester

UL94-V0

• Bushing and cover : zamac

• Actuator : brass, nickel or chrome

plated, or anodized aluminium

• Contacts : silver alloy

GENERAL SPECIFICATIONS

• Mechanical life : 40.000 cycles

• Torque : 2 Nm (1.47 Ft.lb) max. applied to nut

• Panel thickness : see “Mounting Accessories” on the following pages

• Operating temperature : -40°c to +85°C

• Moisture resistance : 56 days

AGENCY APPROVAL

CECC 96201-004

Availability : consult factory for

details of approved models.

Marking : to order switches

marked CECC, complete

appropriate box of ordering

format.

UG1006-A

Summary of content (5 pages)

PAGE 1
3500 series High performance toggle switches - environmentally sealed Distinctive features and specifications UG1006-A ❑ Completely sealed switches withstanding 0,1 bar pressure • Frontal sealing to IP67 or IP69K by a silicone membrane (for sealed panel mounting, add washer U60, section I). • Rear sealing to IP 64 provided by moulded-in terminal inserts A ❑ Approved to European standards CECC 96000 ❑ Three types of terminals ❑ Many lever styles available ELECTRICAL SPECIFICATIONS MATERIALS • Max.
PAGE 2
3500 series High performance toggle switches - environmentally sealed Overview 35 SERIES Number of poles 3 4 Electrical functions Single pole Double pole 1-0 2-0 3-0 4-1 4-2 4-3 4-4 4-5 ON ON OFF ON ON MOM ON ON 3ON4 3ON4 3ON4 1ON6 1ON6 Lever styles 1 2 3 4 5 6 OFF m.
PAGE 3
500 series High performance toggle switches - environmentally sealed ➞ Keyway • Screw, solder lug or quick-connect terminals • Also available with threaded terminals : consult factory • Screw terminals + clamp : on request. 1 2 10.80 (.425) 3 6.35x0.80 (.25x.031) 6.35x0.80 (.25x.031) 4.50 (.177) Ø3.50 (.137DIA) A 10.80 (.425) Ø3.10 (.
PAGE 4
3500 series High performance toggle switches - environmentally sealed LEVER STYLES Ø7.00 (.275DIA) Ø7.00 (.275DIA) 1 2 20.00 (.787) 3 4 25.40 (1.000) 25.00 (.984) 24.00 (.944) 30.00 (1.181) 20.00 (.787) 17.50 (.688) Ø7.00 (.236DIA) 30.00 (1.1811) Ø11.00 (.433DIA) Ø6.00 (.236DIA) A Ø10.50 (.413DIA) 15.00 (.59) Ø6.00 (.
PAGE 5
3500 series High performance toggle switches - environmentally sealed AGENCY APPROVAL None CECC 0 1 A MOUNTING ACCESSORIES 0 For NON-SEALED mounting (panel cut-out fig. 1, 2 or 3) 2 hex nuts 14 mm (.551) across flats, 1 locking ring U121 or U12, 1 lockwasher U13 Panel thickness : 5 mm (.196) max. 2 For SEALED mounting (panel cut-out fig. 2) 2 hex nuts 14 mm (.551) across flats and 1 sealing washer U60 Panel thickness : 4 mm (.157) max. Special hardware : black cap nut U129. Order separately.