Datasheet

ManualsBrandsApem ManualsIndicatorsLED Indicator RGB 16mm 30.8VDC IP67

Secret until lit polycarbonate decals or custom engraving

10 mm colored diffused epoxy lens or 10 mm water clear

super bright LEDs

(2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long)

wire terminations

Available in RGB

DISTINCTIVE FEATURES

• IP67 sealing option (EN60529)

• Operating & Storage Temperature Range:

Rear plastic body: -30 ° C to +65° C ( –22 °F to +149 °F)

Rear epoxy body: -40 ° C to +85° C ( –40 °F to +185 °F)

ENVIRONMENTAL SPECIFICATIONS

Q16 series

Ø16 mm panel mount LED indicators

• Max Reverse Voltage: 5 V

• Viewing Angle: 30–100° (dependant on model)

• Life Expectancy: 100,000 hours

• Torque: 75 cNm (dependent on option)

• Maximum panel thickness 11 mm

GENERAL SPECIFICATIONS

• Plated brass bezel finished in bright chrome, black or satin grey and

moulded polycarbonate rear body

MATERIALS

MOUNTING

The company reserves the right to change specifications without notice.

All LED characteristics are dependent upon environmental conditions. Therefore published data

should be considered nominal and subject to variations.

IND-Q16-1903

LED INDICATORS

Summary of content (8 pages)

PAGE 1
LED INDICATORS IN 1 -Q D 3 90 1 6- Q16 series Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES Secret until lit polycarbonate decals or custom engraving 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs (2.8 x 0.
PAGE 2
Ø16 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current (Min to Max) (Typical All Types) 02 (No Resistor) 1.8 to 3.3 VDC 20 mA max* 6 VDC 5.4 to 6.6 VDC 20 mA 12 VDC 10.8 to 13.2 VDC 20 mA 24 VDC 21.6 to 26.4 VDC 20 mA 28 VDC 25.2 to 30.8 VDC 20 mA STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 80 mcd 10 mcd 2.0 V Green 60 mcd 5 mcd 2.2 V Yellow 50 mcd 4 mcd 2.
PAGE 3
Ø16 mm panel mount LED indicators BUILD YOUR PART NUMBER Q SERIES BEZEL STYLE MOUNTING HOLE 16 Metal Ø16 mm 1 Solder Lug/ Fastons (2.8 x 0.
PAGE 4
LED INDICATORS Q16 series Ø16 mm panel mount LED indicators PROMINENT BEZEL SOLDER LUG/FASTON WIRES PINS REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS 4
PAGE 5
Ø16 mm panel mount LED indicators FLUSH BEZEL SOLDER LUG/FASTON WIRES PINS REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS 5 LED INDICATORS Q16 series
PAGE 6
LED INDICATORS Q16 series Ø16 mm panel mount LED indicators RECESSED BEZEL SOLDER LUG/FASTON WIRES PINS REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS 6
PAGE 7
Ø16 mm panel mount LED indicators CUSTOM ENGRAVING Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied.
PAGE 8
LED INDICATORS Q16 series Ø16 mm panel mount LED indicators SECRET UNTIL LIT POLYCARBONATE INSERTS Some common codes are listed above, for your custom requirements please contact APEM.