Datasheet

ManualsBrandsApem ManualsIndicatorsLED Indicator RGB 22mm 13.2VDC IP67

16.75 mm colored diffused epoxy lens or 16.75 mm super bright

LEDs

Secret until lit polycarbonate decals or custom engraving

(2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long)

wire terminations

Available in RGB

DISTINCTIVE FEATURES

• IP67 sealing option (EN60529)

• Operating & Storage Temperature Range:

Rear plastic body: -30 °C to +65 °C ( –22 °F to +149 °F)

Rear epoxy body: -40 °C to +85 °C ( –40 °F to +185 °F)

ENVIRONMENTAL SPECIFICATIONS

Q22 series

Ø22 mm panel mount LED indicators

• Max Reverse Voltage: 5 V

• Viewing Angle: 30–100° (dependant on model)

• Life Expectancy: 100,000 hours

• Torque: 75 cNm (dependent on option)

• Maximum panel thickness 12 mm (Prominent), 10 mm (Flush)

GENERAL SPECIFICATIONS

• Plated brass bezel finished in bright chrome, black or satin grey and

moulded polycarbonate rear body. Plastic bezel in ABS.

MATERIALS

The company reserves the right to change specifications without notice.

All LED characteristics are dependent upon environmental conditions. Therefore published data

should be considered nominal and subject to variations.

IND-Q22-1903

MOUNTING

LED INDICATORS

Summary of content (9 pages)

PAGE 1
LED INDICATORS IN 2 -Q D 3 90 1 2- Q22 series Ø22 mm panel mount LED indicators DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.
PAGE 2
Ø22 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current (Min to Max) (Typical All Types) 05 (No Resistor) 3.3 to 9.9 VDC 40 mA max* 12 VDC 10.8 to 13.2 VDC 40 mA 24 VDC 21.6 to 26.4 VDC 40 mA STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 82 mcd 70 mcd 5.7 V Green 95 mcd 66 mcd 6.0 V 28 VDC 25.2 to 30.8 VDC 40 mA Yellow 60 mcd 59 mcd 5.
PAGE 3
Ø22 mm panel mount LED indicators BUILD YOUR PART NUMBER Q SERIES BEZEL STYLE MOUNTING HOLE 22 TERMINALS Metal Ø22mm P Prominent R Recessed F Flush Y Chamfer* Plastic PP Prominent FP Flush 1 Solder Lug/ Fastons (2.8 x 0.
PAGE 4
LED INDICATORS Q22 series Ø22 mm panel mount LED indicators PROMINENT BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS 4
PAGE 5
Ø22 mm panel mount LED indicators FLUSH BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS 5 LED INDICATORS Q22 series
PAGE 6
LED INDICATORS Q22 series Ø22 mm panel mount LED indicators RECESSED BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES PINS SHORT BODY WIRES REAR EPOXY PINS 6
PAGE 7
Ø22 mm panel mount LED indicators CHAMFER BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES PINS SHORT BODY WIRES REAR EPOXY PINS (316L STAINLESS STEEL AND ANODIZED ALUMINIUM ONLY) 7 LED INDICATORS Q22 series
PAGE 8
LED INDICATORS Q22 series Ø22 mm panel mount LED indicators CUSTOM ENGRAVING Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied.
PAGE 9
Ø22 mm panel mount LED indicators SECRET UNTIL LIT POLYCARBONATE INSERTS Some common codes are listed above, for your custom requirements please contact APEM.