Instruction manual

Instruction Manual

BASIC FUNCTIONS (continued)

Auto Program

Channel Selection

Antenna SeIection

Press the - CH + buttons to highlight "Antenna" and press the - VOL + buttons to select "Air" or "Cable".

Skip/ Add

You may use this function to skip the undesired program position, thus dramatically quickening program

selection by the - CH + buttons.

SeIect a program position to be skipped.

Press the - CH + buttons to highlight "Skip/Add", and press the - VOL + buttons

to select " Skip" or "Add ".

Note:

Pressing the Channel Number buttons can resume the channel number which has

been skipped.

Press the Channel Number buttons to seIect a program position to be resumed, then

set it to"Skip / Add".

Tuning in

Press the button to caII up the Tune Menu.

Press the - CH + buttons to highIight "Auto Program".

Press the VOL + button and the RPTV wilI search automaticaIly in sequence. After

searching, the RPTV will store the optimum tuning position, and unused channel

number will be set to Skip mode automatically.

Notes:

1 During auto search, press the button to stop auto search.

2 When " Antenna" is set to the Air mode, Auto - search wilI search from channel number 2 to 69,

and when set to the Cable mode, it wiII search from 1 to 125 (During searching," Skip/Add" is

set to the Skip mode automaticaIIy ).

Press the - CH + buttons to highlight "Channel" and press the - VOL + buttons or

Channel Number buttons to select channeI number.

Note: A channeI number of three - digits (Iess than 125)is required to input.

DISPLAY