Datasheet

ManualsBrandsAPM Hexseal ManualsSwitch Components & AccessoriesSealing boot 9.4 mm M6 x 0.75

Full Toggle Switch Boots (covers all external portions of switch & seals switch mounting hole)

Thread Size

Throat Size

Max Toggle

Height

Max Boot

Height ("B")

Color Hex Size APM Part. No. Fig.

1/4-40NS-2B 1.58/0.062 7.11/0.28 9.91/0.390 Gray 9.5/0.375 N5030R A

1/4-40NS-2B 2.64/0.104 7.87/0.31 10.72/0.422 Gray 9.5/0.375 N-5030 A

1/4-40NS-2B 1.58/0.062 12.7/0.500 15.08/0.594 Gray 9.5/0.375 N-5030S A

15/32-32NS-2B 5.55/0.219 16.7/0.66 21.44/0.844 Gray 15.9/0.625 N-1030-1 A

15/32-32NS-2B 5.55/0.219 16.7/0.66 21.44/0.844 Gray 15.9/0.625 IN-1030 B

15/32-32NS-2B 5.55/0.219 16.7/0.66 21.44/0.844 Black 15.9/0.625 N-1030-17 A

15/32-32NS-2B 5.55/0.219 16.7/0.66 21.44/0.844 Red 15.9/0.625 N-1030-31 A

15/32-32NS-2B 6.50/0.256 16.7/0.66 21.44/0.844 Gray 15.9/0.625 1131/31-1 B

15/32-32NS-2B 5.55/0.219 17.5/0.69 23.8/0.937 Black 15.9/0.625 C1131/27 A

15/32-32NS-2B 5.55/0.219 17.5/0.69 23.8/0.937 Black 15.9/0.625 C1131/28 B

M6 X 0.75 2.95/0.116 9.4/0.37 14.3/0.562 Black 9.0/0.352 1131/25-17 B

M12 X 0.75 5.33/0.21 16.26/0.640 21.6/0.85 Black 15.8/0.625 C1131/41-17 B

M12 X 0.75 5.55/0.219 18/0.71 23.8/0.625 Black 15.8/0.625 1131/26-M12-.75 A

M12 x 1 5.95/0.234 17/0.668 21.82/0.859 Black 15.8/0.625 1131/40-17 B

M12 x 1 5.563/0.219 22.86/0.90 27.8/1.093 Black 15.8/0.625 1131/26-M12-.10 B

M12 x 1 6.50/0.256 16.76/0.66 21.44/0.844 Black 15.8/0.625 1131/31-M12 B

NY M6 x 0.75 2,95/0,116 10,8/0,43 14,3/0,562 Black 15.8/0.625 1131/25 B

Note 1: Common switch mounting threads shown; for other threads, use either a threaded bushing adaptor or enquire for other sizes.

Note 2: Throat size is the maximum diameter of the switch toggle / handle (Dimension "A").

Note 3: Max toggle height is the maximum distance from the end of the switch mounting stem to the end of the switch toggle.

Half Toggle Switch Boots (Seals switch mounting stem & hole; toggle actuator protrudes) IP66/IP68 / NEMA 6P Enclosure Protection

Thread Size

Throat Size

(Dimension A)

Toggle

Diameter

Accomodated

Max Boot

Height

(Dimension B)

Color Hex Size APM Part. No.

1/4-40NS-2B 1.19/0.47

1.57-4.57

/0.062-0.18

6.35/0.25 Gray 9.5/0.375 N-5032B

15/32-32NS-2B 2.77/0.109

2.92-6.09

/0.115-0.24

11.1/0.437 Black 15.9/0.625 C1132/20

15/32-32NS-2B 4.06/0.16

5.8-8.94

/0.228-0.352

11.1/0.437 Gray 15.9/0.625 N1030B-160ID

M6 X 0.75 1.19/0.47

1.57-4.57

/0.062-0.18

6.35/0.25 Gray 9.5/0.375 1132/22-2201

M12 x 1 2.77/0.109

2.92-6.09

/0.115-0.24

11.1/0.437 Black 15.9/0.625 1132/33-M12-1-2202

M12 x 1 4.06/0.16

5.8-8.94

/0.228-0.352

11.1/0.437 Black 15.9/0.625 1132/33-M12-1-160ID

Note 1: Common switch mounting threads shown; for other threads, use either a threaded bushing adaptor or enquire for other sizes.

Full Pushbutton Boots (covers all external portions of switch & seals switch mounting hole) IP66/IP68 / NEMA 6P Enclosure Protection

Thread Size

Color

Max Plunger

Height

Max Plunger

Diameter

(Dimension C)

Flat

(Dimension

APM Part No.

1/4-32NS-2B Gray 5.16/0.203 4.76/0.188 9.5/0.375 N5040G

1/4-40NS-2B Gray 3.57/0.141 4.76/0.188 9.5/0.375 N5040

1/4-40NS-2B Gray 5.16/0.203 4.77/0.188 9.5/0.375 N5040R

1/4-40NS-2B Gray 8.73/0.344 3.18/0.125 9.5/0.375 1231/31

3/8-27NS-2B Clear 8.38/0.330 8.12/0.320 12.70/0.500 C1221/21-4

3/8-32NEF-2B Clear 8.38/0.330 8.12/0.320 12.70/0.500 C1221/23

15/32-32NS-2B Black 7.14/0.281 10.72/0.422 15.9/0.625 C1231/41

15/32-32NS-2B Black 11.11/0.438 10.72/0.422 15.9/0.625 C1231/42

M12 x 1 Gray 11.9/0.469 10.72/0.422 15.9/0.625 NC3030H-M12-1

Note 1: Common switch mounting threads shown; for other threads, use either a threaded bushing adaptor or enquire for other sizes.

Note 2: "Clear" allows viewing of breaker amp rating and trip state; please enquire for other available colors.

Seal the shaft and mounting hole of standard rotary switches / potentiometers that use a threaded stem and nut mounting.

IP66/IP68 / NEMA 6P Enclosure Protection

Thread Size

Color

Shaft Size

(Dimension A)

Height

(Dimension B)

Flat

(Dimension

APM Part No. Order Code

1/4-32NEF-2B Gray 3.18/0.125 5.56/0.219 9.53/0.375 N9040X1/8

1/4-28NF-2B Gray 3.18/0.125 5.56/0.219 9.53/0.375 N9042X1/8

3/8-32NEF-2B Gray 3.18/0.125 5.56/0.219 12.7/0.500 N9030X1/8

3/8-32NEF-2B Gray 6.35/0.25 5.56/0.219 12.7/0.500 N9030X1/4

15/32-32NS-2B Gray 6.35/0.250 5.56/0.219 15.88/0.625 N9060X1/4

M6 x 0.75 Gray 4.6/0.18 5.56/0.219 9.53/0.375 1332/38

M9 x 0.75 Gray 6.35/0.250 5.56/0.219 12.7/0.500 C1332/41

M10 x 1 Gray 6.0/0.236 5.9/0.236 12.7/0.500 1332/45

M7 x 0.75 Gray 5,0/0,2 5,5/0,2 12,7/0,5 1332/39-2

M10 x 0.75 Black 6,0/0,236 6,0/0,236 12,7/0,5 1332/46-12

Note 1: Common switch mounting threads shown; for other threads, use either a threaded bushing adaptor or enquire for other sizes.

Note 2: Please enquire for other available colors.

Note 3: Switch/potentiometer shaft must have a smooth, round cross-section where it meets the sealing edge of the shaft seal device.

Sealing for Toggle, Pushbutton and Rotary Switches and Circuit Breakers

TOGGLE SWITCH BOOTS

Switch Fitting Dimensions (mm/inch)

IP66/IP68 / NEMA 6P Enclosure Protection

Switch Fitting Dimensions (mm/inch)

ROTARY SHAFT SEALS

Switch Fitting Dimensions (mm/inch)

PUSHBUTTON SWITCHES & CIRCUIT BREAKERS / PROTECTORS

• Protects against salt water, oil & grease, dust & dirt, fungus, snow, ice, sunlight, cleaning solvents, acids,

washdowns and more!

• Up to IP68 / NEMA6P enclosure protection

• All models fully RoHS (Restriction of Hazardous Substances) compliant

• Rugged silicone rubber standard (ASTM D 1418) available in custom colors. Other materials (Buna-N, Viton A,

FluoroSilicone, etc.) available – please enquire.

• Withstands up to 1 500psi (103 bar) external pressure

• –80F (-62C) to +400F (204C) minimum usable temperature range

• Fully RoHS & REACH compli ant

• Made in the USA by APM Hexseal with over 60 years of experience in sealing solutions

Fig. A

Fig. B