Pentium III Plastic-housing Panel PC with Versatile Stand design User's Manual 120 III, 150 III

User Manual version 2305

APOLLO 120/150 III

FDD cable

5.9.2. External FDD Connection

1. Use the provided 15-34 pin FDD cable

(see below figure) to connect to the

system's 15-pin FDD D-sub connector

located at the rear side of the cover.

2. Connect the other end (34 pin) of the FDD cable to a

standard 3.5” FDD. Match pin 1 of the FDD and pin 1 of

the cable.

3. To drive the floppy disk drive, it will need 5V power.

Connect the provided FDD power cable to the floppy disk

drive to the +5V/12V DC-out connector to obtain 5V

power for the device.