TDS

ManualsBrandsApollo ManualsBall Valves1/2 in. x 1/2 in. x 1/2 in. Bronze FNPT x FNPT 3-Way Diverter Valve

E-3Customer Service (704) 841-6000 industrial.apollovalves.com H-3

Female NPT Thread, 400 CWP (psig), Cold Non-Shock.

FEATURES

• Two piece body

• Reinforced seats

• Blowout-proof stem design

• Adjustable packing gland

VARIATIONS AVAILABLE

• 70-640 Series (316 SS Ball & Stem)

OPTIONS AVAILABLE

(MORE INFORMATION IN SECTION J)

• Minimum quantities apply

• To specify an option, replace the “01” standard sux with the sux of the option.

• To specify multiple options, replace the “01” sux with the desired suxes in the

numerical order shown below. NOTE: Not all suxes can be combined together.

(SUFFIX) OPTION SIZES

-01 Standard Conﬁguration All

-P -01- BSPP (Parallel) Thread Connection 1/4” to 2”

-T -01- BSPT (Tapered) Thread Connection 1/4” to 2”

-02- Stem Grounded 1/4” to 2”

-04- 2-1/4” Stem Extension (Carbon Steel, Zinc Plated) 1/4” to 2”

-05- Plain Ball 1/4” to 2”

-10- SS Lever & Nut 1/4” to 2”

-17- Rough Chrome Plated - Bronze Valves 1/4” to 2”

-21- UHMWPE Seats (Non-PTFE) 1/4” to 2”

-24- Graphite Packing 1/4” to 2”

-27- SS Latch-Lock Lever & Nut 1/4” to 2”

-35- PTFE Trim 1/4” to 2”

-49- No Lubrication. Assembled Dry. 1/4” to 2”

-50- 2-1/4” CS Locking Stem Extension 1/4” to 2”

-56- Multiﬁll Seats & Packing 1/4” to 2”

-57- Oxygen Cleaned 1/4” to 2”

-60- Grounded Ball & Stem 1/4” to 2”

Pressure/Temperature Ratings - Page M-10, Graph No. 3

DIMENSIONS

PART NO. SIZE A B C D E F G H I WT.

70-601-01 1/4" 0.50 1.09 2.25 1.80 3.88 1.18 0.87 1.37 10-24 0.86

70-602-01 3/8" 0.50 1.12 2.27 1.80 3.88 1.18 0.87 1.37 10-24 0.84

70-603-01 1/2" 0.50 1.10 2.75 1.75 3.88 1.18 0.87 1.37 10-24 0.99

70-604-01 3/4" 0.68 1.50 3.00 2.12 4.87 1.62 0.87 1.37 10-24 1.91

70-605-01 1" 0.87 1.59 3.20 2.20 4.87 1.71 0.87 1.37 10-24 2.42

70-606-01 1-1/4” 1.00 1.99 3.98 2.69 5.50 2.09 0.94 1.50 1/4-20 4.27

70-607-01 1-1/2” 1.25 2.21 4.40 2.87 5.50 2.38 0.94 1.50 1/4-20 5.82

70-608-01 2" 1.50 2.34 4.69 3.07 5.50 2.50 0.94 1.50 1/4-20 8.55

STANDARD MATERIAL LIST

PART MATERIAL

Lever and grip Steel, zinc plated w/vinyl

Stem packing MPTFE

Stem bearing RPTFE

Ball B16 Brass, chrome plated

Seat (2) RPTFE

Retainer

B16 Brass (1/4” to 1”)

B584-C84400 (1-1/4” to 2”)

Gland nut B16 Brass

Stem B16 Brass

Lever nut Steel, zinc plated

Body seal (1-1/2” to 2”) PTFE

Body B584-C84400

FLOW PATTERN

NOTE: Open port pressure must exceed closed port pressure.

A BBB

CCC

Lever PositionLever Position Lever Position

3-WAY DIVERSION BRONZE BALL VALVE

70-600 SERIES

Summary of content (4 pages)

PAGE 1
70-600 SERIES 3-WAY DIVERSION BRONZE BALL VALVE Female NPT Thread, 400 CWP (psig), Cold Non-Shock. FEATURES VARIATIONS AVAILABLE • • • • • 70-640 Series Two piece body Reinforced seats Blowout-proof stem design Adjustable packing gland OPTIONS AVAILABLE (MORE INFORMATION IN SECTION J) • • • FLOW PATTERN C C B C A B Lever Position (316 SS Ball & Stem) Minimum quantities apply To specify an option, replace the “01” standard suffix with the suffix of the option.
PAGE 2
FLOW DATA FLOW DATA The listed Cv “factors” are derived from actual flow testing, at Apollo’s Pageland, South Carolina factory. These tests were completed using standard “off the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration.
PAGE 3
FLOW DATA FOR APOLLO BALL VALVES CV FACTORS FOR APOLLO VALVES (CONTINUED FROM M-3) VALVE SIZE (IN.) 1/4 3/8 1/2 3/4 1 1.25 1.5 2 2.5 3 4 6 8 10 12 77C-100/200 Series 4.5 7.2 16 36 68 125 177 389 503 -- -- -- -- -- -- 77D-140 Series 4.5 7.2 16 36 68 125 177 389 -- -- -- -- -- -- -- 77D-640 Series -- -- -- 11 24 35 -- -- -- -- -- -- -- -- -- 77G-UL Series 4.5 7.
PAGE 4
PRESSURE/TEMPERATURE RATINGS ENGINEERING DATA 400 CWP BRONZE ASTM B584 GRAPH 3 600 CWP BRONZE ASTM B584 GRAPH 4 M-10 Customer Service (704) 841-6000 industrial.apollovalves.