Instructions / Assembly

ss-69ELF-PRVWG_03/08/2022
VALVES
The Mosack Group, Inc.
Mint Hill, NC 28227
1.888.229.2874
www.apolloow.com
ss-69ELF-PRV_01/20/21
PEX
Note: Flow curves are based on static conditions of 100psi inlet pressure and
50 psi outlet pressure. Pressure dierential is the dierence between the
supply pressure and adjusted outlet pressure measured in the static (closed)
condition. Pressure fall-o is the decrease in downstream regulated pressure
as the ow increases.
The Mosack Group, Inc.
Mint Hill, NC 28227
1.888.229.2874
FLOW CAPACITY:
CPVC FNPT
PEX B
PEX A PRESS PUSH
PEX-A Installation:
1. Cut pipe squarely and place expansion sleeve on end.
2. Insert expansion tool head into tubing and expand.
3. Immediately remove tool and insert valve end into pipe to
shoulder. Pipe may take up to two minutes to fully seal.
PEX-B Installation:
1. Cut pipe squarely and remove any burrs.
2. Slide ring, clamp or sleeve over end of pipe.
3. Insert valve barb end into pipe.
4. Fasten according to tool directions.
Push Installation:
1. Cut pipe squarely and remove any burrs.
2. Mark insertion depth using depth gauge (sold separately).
3. Push and twist pipe into valve until valve end edge meets
depth line.