SDS

Page 3 of 7
Report No.：CCJC2019A3724-1
深圳诚测检测技术有限公司
Shenzhen CCJC Technology Co., Ltd
Tel: [phone] Http: //www.ccjctek.com Email: [e-mail]
Add: 1st Floor, Xinbaoyi Industry and Trade Building B, Houting Community, Shajing
Town, Bao'an District, Shenzhen City, Guangdong China
1,1-Difluoroethylene polymer
24937-79-9
0-1
Phosphate(1-),hexafluoro-, lithium
21324-40-3
12-16
Polypropylene
9003-07-0
6-10
Aluminium
7429-90-5
2-5
Copper
7440-50-8
5-10
Iron
7439-89-6
10-15
Labeling according to EC directives.
No symbol and risk phrase are required.
Note: CAS number is Chemical Abstract Service Registry Number.
N/A=Not apply.
Eye
Flush eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid.
Skin
Remove contaminated clothes and rinse skin with plenty of water or
shower for 15 minutes. Get medical aid.
Inhalation
Remove from exposure and move to fresh air immediately. Use
oxygen if available.
Ingestion
Give at least 2 glasses of milk or water. Induce vomiting unless
patient is
unconscious. Call a physician.
Section 5 - Fire Fighting Measures
Characteristics of Hazard
Dusts at sufficient concentrations can form explosive mixtures with air.
Combustion generates toxic fumes.
Hazardous Combustion
Products
Carbon dioxide.
Fire-extinguishing Methods
and Extinguishing Media
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.
Attention in Fire-extinguishing
Wear self-contained breathing apparatus in pressure-demand,
MSHA/NIOSH
(approved or equivalent) and full protective gear.
Section 6 - Accidental Release Measures
Personal Precautions,
protective equipment, and
emergency procedures
In case of rupture. Attention! Corrosive material. Avoid contact with
skin, eyes and clothing. Ensure adequate ventilation. Use personal
protective equipment as required. Evacuate personnel to safe
Section 4 - First Aid Measures