Specification

ManualsBrandsApollo ManualsBrass Fittings3/4 in. Brass PEX-A Expansion Barb x 1 in. Reducing Female Sweat Adapter

SUBMITTAL SHEET

Expansion PEX

PEX-A Brass Fittings

EXPANSION PEX

Job Name:

Job Location:

Engineer:

Contractor:

Tag:

PO Number:

Representative:

Apollo

Expansion PEX Brass Fittings are used for making junctions or directional

changes with Expansion PEX pipe constructed potable water systems.

All Apollo

Expansion PEX Brass Fittings comply with the U.S. Safe Water Drinking Act

(SDWA) and the 2011 U.S. Reduction of Lead in Drinking Water Act by containing

equal to or less than 0.25% lead.

All Apollo

Expansion PEX Brass Fittings have barb ends unless otherwise noted.

Apollo

Expansion PEX Brass Fittings can be used with Apollo

Expansion PEX (Pex-A)

or Uponor ProPEX™ tubing.

Specications:

Use Apollo

Expansion PEX Brass Fittings with Apollo

Expansion PEX pipe and fasten to pipe using

Apollo

Expansion Sleeves with Apollo

Expansion PEX Tools. Follow all instructions included with Apollo

tools, fittings, and fasteners.

Features:

• Designed exclusively for use within Type A PEX piping systems

• Full-flow design for maximum water output

• Larger internal diameter results in a 25% greater flow rate within the system

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength

• A cold-expansion tool (sold separately) is required for installation

• Must be secured in place using Apollo® Expansion PEX sleeves or other PEX-A expansion sleeves/rings

• Go/No-Go gauges are never required

• To ensure secure connections every time, fittings cannot be dry fit

Standards / Certications:

• Rated 200º F and 200 psi • Meets CSA B137.5

• Meets ASTM F876/F877/F2023 • cNSFus-pw

• Meets ANSI/NSF 61 & 14 • cUPC

• Not compatible with PEX-B pipe, crimp style (ASTM 1807) or pinch clamp (ASTM 2098) piping systems

Installation:

To cut PEX tubing, use a PEX tubing cutter and cut at a 90° angle. Clear the cut end of any

burrs or debris. Place expansion sleeve on end of tubing. Insert tool head into tubing end and

expand. Immediately remove tool and insert fitting into pipe to shoulder. Pipe may take up to two

minutes to fully seal fitting.

Compatible with Uponor (Wirsbo) ProPEX™. (ProPEX™ is a trademark of Uponor [Wirsbo].)

Summary of content (2 pages)

PAGE 1
EXPANSION PEX SUBMITTAL SHEET Expansion PEX PEX-A Brass Fittings Job Name: Job Location: Engineer: Contractor: Tag: PO Number: Representative: Apollo Expansion PEX Brass Fittings are used for making junctions or directional changes with Expansion PEX pipe constructed potable water systems. ® All Apollo® Expansion PEX Brass Fittings comply with the U.S. Safe Water Drinking Act (SDWA) and the 2011 U.S. Reduction of Lead in Drinking Water Act by containing equal to or less than 0.25% lead.
PAGE 2
EXPANSION PEX Couplings Part # Female Adapters Size (CTS) L H D Wt (lbs.) EPXBC125PK 1/2" 1.46 0.77 0.77 0.05 EPXBC345PK 3/4" 1.69 1.03 1.03 EPXC1210PK 1/2" 1.54 0.67 EPXC12345PK 1/2" x 3/4" 1.79 EPXC3410PK 3/4" EPXC341 EPXC11 Part # Size (CTS) L H D Wt (lbs.) EPXFA1210PK 1/2" x 1/2" FPT 1.33 0.97 0.97 0.08 0.10 EPXFA12S 1/2" x 1/2" FPT 1.52 1.38 1.38 0.06 0.67 0.06 EPXFA12345PK 1/2" x 3/4" FPT 1.45 1.19 1.19 0.15 1.02 1.02 0.