Specification

Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO Number:
Representative:
Wholesale Distributor:
This specication is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion of this specication without notice and without incurring
obligation to make such changes to Conbraco products previously or subsequently sold. Please visit our website @ www.apollovalves.com for the most current information.
Apollo Valves, Manufactured by Conbraco Industries, Inc.
701 Matthews Mint-Hill Road, Matthews, NC 28105 USA
www.apollovalves.com | [phone]
SS1023 © 03/14 Page 1 of 1
DIMENSIONS
Part
Number
Size
(in.)
Dimensions (in.)
Wt.
(lbs.)
A B C D E
70LF-101-01 1/4" 0.37 1.03 2.06 1.75 3.87 0.60
70LF-102-01 3/8" 0.37 1.03 2.06 1.75 3.87 0.56
70LF-103-01 1/2" 0.50 1.12 2.25 1.75 3.87 0.63
70LF-104-01 3/4" 0.68 1.50 3.00 2.12 4.87 1.39
70LF-105-01 1" 0.87 1.68 3.37 2.25 4.87 1.72
70LF-106-01 1-1/4" 1.00 2.00 4.00 2.62 5.50 3.26
70LF-107-01 1-1/2" 1.25 2.18 4.37 3.06 8.00 4.61
70LF-108-01 2" 1.50 2.34 4.68 3.25 8.00 6.06
70LF-109-01 2-1/2" 2.00 3.12 6.25 3.72 8.00 13.96
70LF-100-01 3" 2.50 3.37 6.75 4.12 8.00 18.60
70LF-10A-01 4" 3.12 3.68 7.37 5.25 10.00 25.50
DESCRIPTION
The Apollo® 70LF Series has the same rugged features as the industry standard 70 Series valves with
the added advantage of Lead Free* materials. The 70LF is ideal for plumbing and heating systems,
including potable water. Trusted Apollo® performance with a wide range of popular options.
FEATURES
• Lead Free* Brass & Bronze Materials
• ANSI/NSF 61 Section 8 2008 180°F
• Easily Identiable Blue “Lead Free”
Hang Tag
• RPTFE Seats and Stung Box Ring
• Chromium Plated Ball
• Designed, Manufactured, and 100%
Factory Tested in the USA
PERFORMANCE RATING
• CWP: 600 psi (41.37 Bar) at 100°F
• SWP: 150 psi (10.34 Bar) at 366°F
• Maximum Temperature: 450°F
• Vacuum Service to 29 in. Hg
MODELS
• 70LF-100 Series Standard
• 70LF-140 Series 316 SS Ball & Stem
APPROVALS
• MSS SP-110; Ball Valves Threaded,
Socket-Welding, Solder Joint, Grooved
and Flared Ends
• NSF /ANSI 61-8 , Annex G
• NSF /ANSI 372 Lead Free* ANSI 3RD
Party Certied
• CRN: OC10908.5C
OPTIONS
• (-04) 2 ¼” CS Stem Extension 1/4” - 3”
• (-07) Steel Tee Handle 1/4” - 2”
• (-10) SS Lever & Nut 1/4” - 3”
• (-11) Therma-Seal
TM
Insulating
Tee Handle 1/4” - 2”
• (-27) SS Latch-Lock Lever & Nut 1/2” - 4”
• (-32) SS Tee Handle & Nut 1/2” - 2”
• (-47) SS Oval Latch-Lock Handle
& Nut 1/2” - 1”
• (-92) Balancing Stop 1/4” - 3”
• (-94) –04 option & Balancing Stop 3/8” - 3”
STANDARD MATERIALS LIST
Part Name Material
Lever and Grip Steel, Zinc Plated w/ Vinyl Grip
Stem Packing RPTFE
Stem Bearing RPTFE
Ball C27451 Lead Free* Brass, Cr Plated
Seat (2) RPTFE
Retainer
C27451 Lead Free* Brass
(1/4" to 1")
C89836 Lead Free* Bronze
(1-1/4" to 4")
Gland Nut B16 Brass
Stem C27451 Lead Free* Brass
Lever Nut Steel, Zinc Plated
Body C89836 Lead Free* Bronze
LEAD FREE
70LF-100 Series
NPT Bronze Ball Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead
by weighted average. Complies with CA AB1953, VT Act 193, MD HB372, LA HB471 and
Federal Public Law 111-380. ANSI 3rd party approved and listed.
C
B
O A PORT
E
D