Repair Guide

iPhone 13 Pro

Broken Glass

Tools

Warning

iPhone displays and some back covers are made of glass. The glass could break if the iPhone

is dropped on a hard surface, receives a substantial impact, or is crushed, bent, or deformed.

Don’t attempt to remove chipped or cracked glass shards.

If the iPhone glass is broken, perform the following steps before you begin a repair:

1. Put on safety glasses with side shields and the cut-resistant gloves.

2. Use a vacuum cleaner to remove glass pieces from your workspace and the iPhone.

3. Attach a protective cover to the broken glass to prevent injury or scattering of glass. Each protective

cover has a release liner underneath. Slowly pull the release liner out from under the protective cover

while pressing the cover onto the enclosure.

4. Fold the release liner. Use the shiny side of the release liner to firmly press the protective cover onto

the broken glass and smooth out any air bubbles.

5. Wait at least 12 minutes for the bond between the protective cover and the glass to strengthen.

6. If the back glass is broken, place the iPhone into the heated display pocket.

• Back protective cover

• Cut-resistant gloves

• Display protective cover

• Heated display pocket

• Safety glasses with side shields

• Vacuum cleaner