Repair Guide

iPhone 13 Pro
073-00324-A | 35© 2022 Apple Inc. All rights reserved.
21. Use a torque driver and the
Micro stix bit to remove
the three trilobe screws (1)
from the lower cowling. Set
aside the screws.
22. Use ESD-safe tweezers to
remove the lower cowling.
Save the cowling for
reassembly.
23. Use a torque driver and the
Micro stix bit to remove the
two trilobe screws (2) from
the upper cowling. Set aside
the screws.
25. Use ESD-safe tweezers to tilt up the upper cowling. Then slide the cowling out from under the
ambient light sensor flex cable. Save the cowling for reassembly.
24. Use a torque driver and the
JCIS bit to remove the two
crosshead screws (3) from
the upper cowling. Hold the
cowling in place while you
remove the last screw. Set
aside the screws.
Don’t tear the ambient light sensor flex cable while removing the cowling.
Caution
Display | Removal