Repair Guide

iPhone 13 Pro
073-00324-A | 45© 2022 Apple Inc. All rights reserved.
16. Use ESD-safe tweezers to position the lower cowling over the ends of the display and battery
flex cables.
18. Use the green torque driver
and JCIS bit to install two
new crosshead screws into
the upper cowling (2).
17. Use ESD-safe tweezers to
slide the tab of the upper
cowling behind the ambient
light sensor flex cable (1).
Then lower the cowling over
the end of the flex cable.
19. Use the black torque driver
and Micro stix bit to install
two new trilobe screws into
the upper cowling (3) and
three new trilobe screws
into the lower cowling (4).
Display | Reassembly
14. Press the ends of the
display flex cable (1) and
ambient light sensor flex
cable (2) to the connectors.
Press evenly along the
length of each connector.
15. Press the end of the battery
flex cable to the connector (3).
Press evenly along the length
of the connector.