Repair Guide

iPhone 13 Pro
073-00324-A | 46© 2022 Apple Inc. All rights reserved.
20. Peel the first strip from
the middle release liner (1)
clockwise, starting near the
bottom right of the enclosure.
Peel the second strip (2)
counterclockwise, starting
near the bottom right of the
enclosure. Peel the third
strip (3) clockwise, starting
near the bottom left of the
enclosure.
21. Inspect the display adhesive to ensure that it’s in the correct position and not damaged or wrinkled. If
the adhesive is damaged, remove it and apply replacement adhesive.
22. Repeat step 3 to ensure that the TrueDepth camera is in the correct position. Then continue to step 23.
23. Pull the tabs on the suction cups to release them from the display. Tilt down the display to rest on
the enclosure.
24. Remove the suction cups from the repair tray.
Display | Reassembly
Inspect the enclosure for loose or extra screws and small parts, which can damage the battery and
cause safety issues.
Warning
Middle release liner