Repair Guide

iPhone 13 Pro
073-00324-A | 49© 2022 Apple Inc. All rights reserved.
29. Use the gray torque driver
and Torx security bit to
install two new security
screws, one on each side of
the Lightning connector. As
you install the screws, press
lightly on the display near
the Lightning connector.
If the screws aren’t flush,
remove and set aside the
screws. Repeat step 29
to install another new
set of screws. If the new
screws still aren’t flush,
repeat all removal and
reassembly steps.
Caution
• System Configuration is required if you’ve installed a replacement display, battery, or
camera. Disregard notifications about iPhone features on the Lock Screen until you complete
System Configuration.
• After you’ve completed all removal and reassembly steps, learn how to initiate the System
Configuration process at support.apple.com/self-service-repair.
Important
Display | Reassembly
28. Remove the repair tray from the display press.