Repair Guide

iPhone 13 Pro
073-00324-A | 63© 2022 Apple Inc. All rights reserved.
1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
4. Lift the end of the
Taptic Engine flex cable off
the connector.
Removal
Taptic Engine | Removal
2. Use a torque driver and the
JCIS bit to remove the two
crosshead screws from the
Taptic Engine (1). Set aside
the screws.
3. Use a torque driver and the
super screw bit to remove
the super screw from the
Taptic Engine (2). Set aside
the screw.
5. Remove the Taptic Engine from the enclosure.